No power to the control board. What can be the problem?
If there is no power getting to the control board on the dishwasher then you will want to first check the breaker in the home. If the unit is plugged into the wall then look for a GFCI that is popped. You will also want to check the junction box at the bottom of the unit where the electric connects to the unit and look for a loose connections. Then check the wiring from the junction box up through the door and to the control board. If this checks ok and there is power at the control board then the control panel would be the issue of the unit not working.
maytag mdbtt60aww won't start. cycle lights go on when pressed but press start and nothing happens. Sheet says pin 10 to pin 6 should show open circuit and when pressed read 10 ohms. How do I identify pin numbers?
Answer William, In most cases, pin #1 is usually marked on the control board connector with an arrow or the number 1 as well as the ribbon tracer. You may have to look very closely, they can be hard to see at times.