Whirlpool 74005750 Control Panel Assembly (blk)

Total
$0.00

Part Number:	AP4098059
MFG Part Number:	74005750
Made by:	Whirlpool

Our Price
$196.94
Regularly	You Save
~~$234.36~~	$37.42

Most Interesting

Hi Guys! Our Jenn-Air JDS9860BDB range is 5 years, 8 months old. The gas top works fine. The clock/day of week works fine. Our keypad is not responsive unless I kill the power, then power up. Everything works for about 1 minute, then goes to just the clock/day display. I'm comfortable with electronics. Getting behind the panel was easy, nothing looked fried, visually checked/cleaned all connectors. Definitions of parts are an issue. I saw the PC board, is that the "ERC" electronic range control? There are also the LCD screen and the well hidden keypad. Which part(s) should I order? Thank you great helpers in the cloud! - JH

John H. for Model Number Jenn-Air JDS9860BDB

Answer John, You're on target, mostly. The PC board and display are all inclusive with the ERC(electronic range control) 8507P232-60. The keypad, is also inclued in the control panel W10206070, based on your post, thats the part you're going to need. If you have a multi meter, you can check each keypad for the proper circuitry when pressed, but that test could produce the desired readings and still have a malfunction.

Was this helpful?

My Jenn Air slide in unit started beeping and wouldn't stop, so I called Jenn Air and they gave me a number to call. I have called several times with no return call. I shut the curcuit off and on and tried several times. I finally disconected the beeper. The stove worked for about 4 months, and now it will not respond. I get a code of F 1-8. Nobody can tell me what that means. Do I need a new control pad? If I replace the control pad/module, will that fix the oven. The stove is still clean. I hate to get a new stove, if I can fix it. Does the control panel include the module/ sending unit? Can someone please help me out. Thanks, Al

Al B for Model Number JDS9860AAB

Answer AL, " F1-8 Shorted key (pad) in membrane switch. Ensure ribbon cable is securely connected, inspect ribbon cable and connector (shorts, breakage, corrosion, etc.). If OK, replace control." They control panel assembly 74005750 consists of the panel and the keypads and ribbon. The ERC 74006363 "module/sending unit" is a separate component.

Was this helpful?

This range came with the house. When it first developed a problem, I turned power off at the breaker box then back on, and the touchpad would work for the vent fan, auto bake at 350 F., and warm at 170 F. So as long as we could bake at 350 F, I put off the repair. Today it started beeping (sounds like an S.O.S.) and the touchpad is completely nonfunctional, so I finally shut it off at the breaker. Serial number is 13009588ZM. Any suggestions on whether to replace the control pad, control board, or to just replace the whole darned thing?

Alan for Model Number Maytag/Jenn-Air JDS9860AAB

Answer Hi Alan. Is the beeping along with showing a code ? The F-3 means that the oven sensor part # 12001656 needs changed. It should read 1080-1100 ohms cold. While checking it, rotate the wires so you are getting a full range of checking it. Remove the door and the control panel. Disconnect the ribbon cable from the clock. If it continues to beep then the clock is needing replaced. It is part # 74006363. If it only beeps when the touch pad is plugged in then the keypad is stuck shorted, needing replaced. It is part # 74005750. Thank You.

Was this helpful?

Latest Questions

The clock keep flashing check prob sensor, but it is not plugged in and I hit cancel on the touch pad. Then the clock flashes F1-8.

Tracey for Model Number JDS9860aab

Answer Hello Tracey. Based on the error code you provided, the control panel 74005750 is bad and will need to be replaced on the unit. If the problem continues, the manufacture suggest you replace the control board. You can unplug the ribbon cable and see if the code goes away. If so, this will show it is the control panel.

Was this helpful?

Some of the numbers are not working on my control panel for my Jenn Air Model JDS9860AAB. Its very hard to bake a potatoe when the numbers 3 and 4 don't work! Following research of your repair forum, I ordered part number AP4098059.I found very detailed installation instructions on your repair forum for the similar part AP4094903. I assume these instructions will work on my part as well. Am I correct? Thank you very much for providing this service. The appliance repair service wanted $800 to fix this (parts and labor).

Bob Robinowitz for Model Number AP4098059

Answer Bob, Here are instructions for your specific model number "Control Panel 1. Remove power from unit. 2. Remove burner switch control knobs. 3. Open oven door and remove screws securing control panel. 4. Remove screws located on the right and left sides of the control panel. 5. Grasp control panel on the far left and right sides and gently pull the control panel out and down. NOTE: Gently pull control panel out and down. 6. Remove infinite switch control knobs, infinite switches, indicator lights, rocker switches, and electronic control/clock (as necessary) and transfer to the new control panel. 7. Reverse procedure to reinstall control panel. Electronic Control 1. Remove control panel, see “Control Panel” procedure, 2. Remove screws securing electronic control bracket to control panel. 3. Label and disconnect terminal wiring from electronic control. 4. Reverse procedure to reinstall electronic control." Good Luck and Thanks

Was this helpful?

Numbers 6-9 are not working on my oven control panel what do I need.

Lynn for Model Number jds9860aab

Answer Hello Lynn, if only certain numbers are not working on the touch pad. You will want to consider replacing the touchpad 74005750, thanks!

Was this helpful?

Control Panel Assembly (blk)

Questions & Answers

Appliance Compatibility Tool

Repair Help

Questions & Answers

Most Interesting

Latest Questions

Cross Reference and Model Information