Control Panel Assy W/membrane, Switch (white)

JAW3D for Model Number GBD307PDT7

Answer Jaw3d, You will want to check your connector from the keypad to the control board to ensure that you have a tight fit. If this does not correct then it would be a keypad issue. 

Joe T for Model Number Amana GBD307PDQ7

Answer Hello Joe, The F2 E6 error code indicates a cancel key drive error. You will need to replace the control board 8302967. 

Dean C. for Model Number GBD307PDT09

Answer Hi Dean. We are sorry but the clock part # W10406070 this item is discontinued. Thank You. 

Rich for Model Number GBD307PDQ7 Whirlpool double oven

Answer Hello Rich. You will need to check the thermal fuse 5304461262 going to the control panel. It should read closed for continuity. If it is open, you will need to replace it. It is mounted in the black wire next to the control board. Hope this helps. 

Steve for Model Number gbd307pdq09

Answer Hello Steve. If the connections on the board are good and seated properly, then you will need to replace the control panel assembly 8300441. Hope this helps. 

Jim K for Model Number GBD307PDT6

Answer Hello Jim! If the oven does not function after the self clean cycle it can sometimes mean one of the saftey thermostats in the rear of the oven have burnt out. That part is 9759243. I hope this helps!