Whirlpool 6610457 Control, Range (white)

Control, Range (white)

Total
$0.00

Part Number:	AP3851122
MFG Part Number:	6610457
Made by:	Whirlpool

Part Number:

AP3851122

MFG Part Number:

6610457

Made by:

Whirlpool

Our Price
$245.39
Regularly	You Save
~~$292.01~~	$46.62

In Stock — Ships Today Guaranteed

Quantity

Questions & Answers

12 Questions & Answers

Made by Whirlpool. Whirlpool brands include Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and others.
Whirlpool also makes various appliance models for Sears / Kenmore.

Appliance Compatibility Tool

Check your model number or use our Cross Reference Tool to find out if this part will work with your appliance.

Where can I find my model number?

Oven bake and broil heats up, but will not hold or reach set temperature; oven sensor has been replaced but still having the same problem; is there a separate oven temperature switch or does the entire control board have to be replaced?

Cody E.h. G for Model Number RF364PXPQ 1

Answer Cody, Are you sure there are 220-240 VAC at the terminal block, when the bake mode and temperature are selected ? If the voltage is proper, yes, you'll need a new control 6610457, there is no separate switch for the oven temperature. Thanks and Good Luck

Was this helpful?

Burners work, oven does not control panel has error code FOEO. How do I reset clock so oven will work?

Robert R. for Model Number RF365PXMQ

Answer Hello Robert. Based on the information you provided, it sounds like the range control 6610457 is bad and will need to be replaced. Hope this helps.

Was this helpful?

I'm at the end of my rope. I've got an oven that does not heat to 350 during the normal pre-heat time (6 minutes). There are no error codes. I've attempted to replace the oven sensor and this control board with no change. I've changed both broil and bake elements (old sensor and control board)...no change. Is there anything else a DIYer can do to fix this? I've seen checking the voltage at the elements to see if they're at 220-240VAC, but am drawing a blank as to what to check across (ground to one side of element terminal?) Let's just assume facts not in evidence and say it's not at 240VAC as it should be, is that some sort of relay or fuse that can be replaced? Please help. Thanks.

Mars for Model Number RF378LXPQ1

Answer Hello Mars. You will test from one side of the element to the other side of the element. Do not test to ground. You should have 240 volts. If not, you will need to test from the control and see where you are loosing the voltage at. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. Hope this helps. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html

Was this helpful?

Control, Range (white)

Questions & Answers

Appliance Compatibility Tool

Repair Help

Questions & Answers

Most Interesting

Latest Questions

Cross Reference and Model Information