I ordered a cover but it needs the part that the tube feeds into, unfortunately that part was accidentally cut off and I need to feed the tube back in. Cannot use the current one as the original part of the hose was glued into that part. Is it possible to get just that part? If so how do I order it.
Answer AZ Mom, No, unfortunately the "spout/guide" is not available as a separate part. You will need to order a replacement Guide, Water Line
67002743 to recieve the "spout/guide" and replace the assembly. It won't be too difficult, the water tube is routed through a channel inside the liner, and attaches to the water tank on the back wall of the refrigerator compartment.
AP4366606 snaps into another part that is riveted into the lining of the refrigerator wall. Can I purchase this other part? I'm considering putting a secondary water dispenser on the outside left side of my refrigerator (don't laugh) and that part would make installation cleaner. Thanks.
Answer Brian, There are several more parts involved, tubing,switch and wiring. (22 thru 32) plus a couple of 1/4 inch tube couplers, and will need to mount a box on the outside wall, or put a hole in the side of the fridge to mount the assembly and parts and thens seal everything so you don't create a void and have a condensation or loss of cooling issue. It's a great idea, You may want to post a "How To" and results when you're done. Good Luck and Thanks
How do I remove the Facade Water dispenser to replace part # PS2344403
Answer Hi Tom. You use a plastic putty knife under the sides to release the cover part # 12706909SP. Thank You.