Cycle Switch

Helen for Model Number mvwc6esww1

Answer Hello Helen. I f the unit is not filling and is agitating, you will need to order and replace the temp switch W10248240 on the unit. 

Debbie for Model Number MAV408DAWW

Answer Hello Debbie. You will need to check and make sure the cold water valve is good. If there is power to it, and no cold water, the unit will not fill on rinse, and you will need to replace the water valve 21001932 on the unit. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html 

Vera for Model Number LXR7244PQ0

Answer Vera, You will need to check your lid switch assembly for continuity. With the lid closed the switch should have continuity. If not then the lid switch 8318084 is bad and will need to be replaced. 

Lisa for Model Number Kenmore 90 series washing machine

Answer Hello Lisa, This sounds like it would be a timer issue. To properly assist you we will need your model number to help you with this. Please post your model number with a new question on the parts page. http://www.appliancepartspros.com/modelnumber_locator.aspx 

Jason for Model Number mvwc6esww1

Answer Jason, You can check the switchW10168257 circuits with a multi meter, In the "ON" position it will have a"closed" circuit, and the "OFF" position will have an "open" circuit(infinite resistance). Chances are the switch will check out properly. Your issue is most likely in the water temp switch W10248240 and/or the timer delay control W10104800 or the wiring and connections between the two components. 

Rick C. for Model Number MVWC6ESWW1

Answer Hello Rick, The most likely cause of this failure is the extra rinse switch W10168257.