My right hand side door (fresh food) is not closing properly. It seems like there is no suction between gasket and metal part. The door is also hanging 1/2 inch lower than freezer door which is opposite on what it shows on manual, do you think replacing door cam both upper and lower will help if so which part do i need?
Appreciate your help,
Answer SM, First check and make sure the refrigerator is level, and all four feet and rollers are on solid flooring. Replacing the upper spacers or thimbles won't make a difference, but the lower cam and closer 2182179 W10329686 may compensate for 1/4 inch or so. You'll also need to remove the kickplate and check the door hinge W10138965 for being bent and or the mounting screws being loose. Check the door gasket especially in the lower corner to see if the edges have rolled over or are damaged. If Ok, wash the gaskets with hot soapy water, then apply a thin coat of "Vaseline" to the gasket surfaces to keep them soft and pliable.