Broken hinge tabs for kitchenaid ice dispenser door John H. • Keller, TX • June 13, 2014 Appliance: Whirlpool Refrigerator KSRL25FTSS00 My Repair & Advice I used the Broken Tab Ice Door Kit and the repair was perfect! The ice dispenser works better now than before the door broke. Buy the repair kit, follow the instructions, and here's a few notes from my experience: 1. I initially only removed the broken/fragmented parts of the ice door tab hinges. The metal adapter fits around the existing hinges. 2. I did a few (3 to 4) test fits of the adapter using the hinge pin and door to check for proper alignment. I ended up shaving off a bit of what was left of the broken tab to provide some clearance for the new adapter. I did another fit check and the door seal was perfect. 3. This is very important: Follow the directions regarding what adhesive backings to remove and what not to remove!!! It appears they've modified this kit without removing the extra adhesive material. There's a bracket that compensates for this. 4. This is equally important: I performed several "practice" test trial installations (10 to 15) before removing the adhesive backings. These fit checks included using the hinge pin to ensure proper alignment with the remaining plastic hinge pin. This is your "right of passage". When you're confident, remove the adhesive backing and go for it! 5. Replace all the parts provided in the kit! It turns out my door closing damper was a bit worn and ice cubes would sometimes come flying out and onto the floor. Another problem is now solved! Was this review helpful to you?