We have a Frigidaire electric oven with glass door and control panel. Is there a retrofit kit or a replacement door to change the outside to Stainless Steel finish? Thank you
Answer Hello Ray,
Oven doors are only available in multiple pieces and the door liner and glass has to be transferred from the other door assembly. We could provide you with the part number for the outer door if you could please re-post with the model number from the units' I.D. tag.
Is there a video detailing replacing the outer glass panel for model kebc278ss02?
Answer Hello Joann. I apologize but we do not have a video for replacing the door glass. Here are some basic instructions that should help get you through the repair. To change the glass in an oven door, you will need to determine how to remove the door on the model number you are working on. If you open the door to the first stopping point, some oven doors will lift off the unit in this position. On other models, you will see clips on the back of the hinge toward the opening where the hinge enters the range. If yours is like this, you will open the door all the way open, then pull the clips down until they stop and lock in place. Then close the door to the stopping point and lift the door off the range. If you door does not lift off, and it does not have the clips, then you will open the door all the way open. You will see a hole in the hinge at the bottom of the door. You will insert a pin or nail into that hole and close the door to the stopping point. Then you can lift the door off the unit. Once the door is removed, you will lay it on a soft surface and disassemble the door. Pay attention and make notes if needed for reassembly of the oven door. Once you have replaced the door glass, you will reinstall the oven door back onto the range in reverse order of the way you removed it.