Door Hinge

Larry for Model Number Dishwasher Kudio 1FLSS3 *or* Kubio 1FLSS3

Answer Larry, model should read KUDI01FLSS3. You will need to replace the parts in the door balance link kit 8194001 and spring 8270182 if broken. Over time the cables in the kit break due to wear and tear and age. We do not have any information on any recalls regarding this item. Thanks! 

James for Model Number KUDC031VWH

Answer Hello James, The door is adjusted by leveling the unit. Think of it like a box standing up on end. If one corner isn't touching the floor, it throws a warp in the box and it won't be square. It's the same way with the dishwasher. If one foot isn't touching the floor or one foot is adjusted too long, it throws a warp in the body that affects the door strike. 

Richard H for Model Number KUDP02CRBL2

Answer Hello Richard. If the wiring harness is burnt on the unit you will need to replace the harness on the unit. Usually this issue you are having is caused by the fuse W10258275 in the unit, and sometimes, they may test good and really be bad in the unit. 

Tom for Model Number kudp02frss0

Answer Hello Tom. Check the hinges 8534854 and make sure they are not bent. if they are good, check the springs 8270182 and the links 8194001 on the unit and see if either is bad on the unit. You will need to pull out the dishwasher 8 to 12" to check these parts. The electrical and water should be turned off to do this. 

Jane for Model Number kuds01flss

Answer Jane, Silicone spray, is not the best libricant to use on hinges, You should be using something like, white lithium grease, wheel axle grease, or moly kote grease. You also need to check the springs 8270182 and roller assemblies 8194001 That's where the majority of door hing noises come from. Good Luck. 

John J. for Model Number kudso1flss5

Answer Hi John. The door hinge springs hook to the cord and to the back of thye frame lower back rail. There is a kit for this part # is 8194001. Thank you.