Whirlpool 99002292 Door Latch - AppliancePartsPros.com

Door Latch

Total
$0.00

Part Number:	AP4113237
MFG Part Number:	99002292
Made by:	Whirlpool

Part Number:

AP4113237

MFG Part Number:

99002292

Made by:

Whirlpool

Our Price
$73.89
Regularly	You Save
~~$88.67~~	$14.78

In Stock — Ships Today Guaranteed

Quantity

Questions & Answers

3 Questions & Answers

Description

Dishwasher door latch includes the two switches. Handle not included. For the handle order 99002836.

Made by Whirlpool. Whirlpool brands include Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and others.
Whirlpool also makes various appliance models for Sears / Kenmore.

Appliance Compatibility Tool

Check your model number or use our Cross Reference Tool to find out if this part will work with your appliance.

Where can I find my model number?

Most Interesting

I have no power to the dishwasher using any of the push button switches. There is power going into the right side of the door switch. When the switch is latched, I'm unable to get any power from the left sided terminals. I replaced the switch and I still have the same problem. I even replaced the control panel but the washer still won't turn on. The float switch seems to test out OK on the multimeter. ApplianceParts is sending out another door switch. Am I correct in assuming that once the door switch is latched, there should be power coming out of the left side of the switch? Also, when the door is latched, I can't measure any more voltage on the right side of the switch until the switch is again unlatched. Thanks for your help.

Scott for Model Number MDB6650AWB

Answer Hello Scott. Test both switches, not for power, but for continuity. They both should close when the latch is closed on the unit. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html

Was this helpful?

I replaced the control panel, the latch isn't making the micro switches. There is power at the switches.

Tom for Model Number mdb6650awq

Answer Hello Tom. Check and make sure the door latch is installed properly after replacing the control panel. If so, and the switches do not work, you will need to replace the door latch 99002292. Hope this helps.

Was this helpful?

My door latch has become very hard to open. The electronic part is work fine. It's seems that the handle isn't traveling far enough to unlatch the door.

Bj for Model Number MDB9150AWS

Answer Hello BJ. You will need to check and see if the door latch 99002292 is bad, or if the handle 99002836 is broke. You will need to remove the inner door panel to access and check the door latch and handle. Hope this helps.

Was this helpful?

Door Latch

Questions & Answers

Description

Appliance Compatibility Tool

Repair Help

Questions & Answers

Most Interesting

Cross Reference and Model Information