Whirlpool 22001448 Drain Hose - AppliancePartsPros.com

Total
$0.00

Part Number:	AP4028392
MFG Part Number:	22001448
Made by:	Whirlpool

Our Price
$19.29
Regularly	You Save
~~$51.57~~	$32.28

Most Interesting

I have a Maytag A512 washer that is about 21 years old. I am replacing both the hoses that go to the washer drain pump. The longer hose to the siphon break on my washer appears to have a plastic or metal band that attaches the hose to the siphon break instead of a adjustable camp shown on the Illustrated parts list. Can I just cut that band off and use the clamp to attach the new hose without having to replace the entire siphon break?

Dean for Model Number A512 Maytag washer

Answer Hello Dean, Yes you can cut the band and put a screw down clamp. Just be sure to make sure that you do not overtighten.

Was this helpful?

I have a small amount of water leaking from end of the drain hose where it connects to the drain pump. Water drips only during a water change and it drips more at the beginning of the cycle (when the tub has more in it). It would make sense to replace the drain hose but could there be an issue with the drain pump itself? Water only drips from the bottom of the drain hose near the clamp. Thanks for the guidance.

Mike for Model Number Maytag LAT8740AAW

Answer Hello Mike. If the drain hose is cracked and leaking, you will need to replace the drain hose 22001448 on the unit. Remove it from the pump assembly and inspect it for cracks and see if it is leaking. If so, replace it.

Was this helpful?

Is this the hose that goes from pump to siphon break?

Rick J. for Model Number LA512

Answer Hello Rick. Yes, this is the correct pump to break hose 22001448 for the model number you provided. Hope this helps.

Was this helpful?

Latest Questions

Water seems to be leaking at top of hose connected to drain solenoid. Is this a part or just a junction to outside drain?

Yoyo for Model Number lat5005aae

Answer YOYO, I believe you have a cracked or loose "tub to pump hose" Y212989. It is a separate part of the drain system in the washer and a pretty quick easy repair, except for the water spillage. You don't have a "drain solenoid" but, you do have a belt driven drain pump with a hose going out the back of the washer to the drain standpipe. Replace the hose and you should be fine. Thanks and Good Luck.

Was this helpful?

I'm not sure what's the name of hose or tubing. (water is pumped out of the washer)

Patreida for Model Number A412 Maytag washer

Answer Hello Patreida. The hose that goes to the washer drain is the drain hose 22003410. Hope this helps.

Was this helpful?

Drain Hose

Questions & Answers

Description

Appliance Compatibility Tool

Repair Help

Questions & Answers

Most Interesting

Latest Questions

Cross Reference and Model Information