Replacement of belt after overloading
Corey C. • Wadsworth, OH • July 22, 2014
Appliance: Model AMANA WASHER
My Repair & Advice
Repair is relatively simple. Unplug washer, remove motor carriage, 4x1/2" bolts, then unplug motor and take belt off of pulley under wash tub. Remove 3 torx bolts securing pump, then pull pump off. Removing the pump isn't easily done without tools, but it can be done. Prying it off the motor with tools may damage it. Once the pump is off, replace the belt and put it all back together.
People found this story helpful
Repair Time Estimate