Drum Support Roller

David for Model Number 1108892601

Answer Hello David. The drum support rollers are sold individually. Have a great day.. 

1 person found this answer helpful.

Burke for Model Number 11060902990

Answer Hello Burke. You need to order part number 4392067 for the kit. 

Ron H for Model Number 110.85872400

Answer Hello Ron. You need to order 4 rollers. 

Keith for Model Number GEW9200LW0

Answer Keith, You will need part number W10512946 for the triangle clips. 

Robert P for Model Number ymedb400vq0

Answer Robert, If you check the blower wheel and there was no lint clogged up on it causing it to go off balance and vibrate then the rollers would be the most likely cause of the unit shaking and vibrating. 

Dudley for Model Number sde4606ayw

Answer Dudley, the rollers aren't going to be the issue, unless they make nosie, Youmamy want to check, clean, and lubriacte the shaft and roller bearings. You do want to check the tumbler RPM, place a piece of tape on the end of one of the baffles, select air dry/fluff and hold the door switch closed and start the dryer The drum should rotate at 50 RPM(+/- 2) If the RPM is in range, you'll need to review the loading instructions for the dryer, and / or install a Baffle Kit 12002559 to reduce the bunching up of the articles.