Dryer Thermostat Kit

Gs for Model Number StarlitTX@yahoo.com

Answer GS, No, it doesn't matter which way the dot goes on the heating element. 

Theima for Model Number pye2300ayw

Answer Hello Theima. If the unit is heating, but the drum is not turning, and it is not locked up, you will need to order and replace the motor on the unit. If the thermal fuse was bad, there would be no heat. 

Matt for Model Number LNC7764A71

Answer Hello Matt! Yes, you can use the dryer thermostat kit LA-1053. Thanks! 

Jackie for Model Number pyet344aym

Answer Helo Jackie. Based on the information you provided, it sounds like the thermostat kit LA-1053 will need to be replaced on the unit. You will also need to look for a clogged or kinked vent that caused this issue. The thermal fuse should read closed for continuity. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html 

Joe for Model Number TEDS840JQ3 WHIRLPOOL ESTATE ELECTRIC DRYER

Answer Hello Joe. Check and make sure you have 240 volts coming to the dryer. Check and make sure the unit is not set to Air Fluff. Also check the heater and thermostats and see if they are good. You can test these with a multi-meter TJMA-DM1. They should read closed for continuity. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html 

Bob for Model Number 76965100

Answer Hello Bob, You will want to check the temp switch to make sure that on low temp the unit is sending power to the heating element. If the temp switch checks ok then you would more than likely need new timer as the cam is not engaging the heater.