How do I test the dual motor, 3374501. The wet agent is not dispensing.
Answer Hello Bob. You test for power coming to the dual motor. If there is power there and it does not work, replace the dual motor 3374501 in the unit.
DISHWASHER SOAP DISPENSER ISN'T WORKING
Answer James, You'll need to dismantle the door assembly, and check the wax motor, linkage, actuator levers and springs on the dispenser mechanism, and also manually activate and move the assemblys as necessary. "Accessing Components Inside the Door 1. Disconnect the dishwasher from the electrical supply and remove the toe panel and access panel from the bottom of the dishwasher. 2. Disconnect the end of the door springs from the door spring tension adjustment holes in the frame runner. Note which holes were used and reattach the door springs in the same holes when the repairs are complete. 3. Open the dishwasher door and remove the eight (8) T-15 Torx screws securing the inner door panel from the door frame. 4. Remove the timer cover by releasing the two (2) retaining tabs at each end from the
door frame." Thanks and Good Luck