The ice cube tray is not filling with water. The ejector tines are in the up position. Could this be an inlet valve?
Answer Hello Darlene. You will need to check and make sure the fill tube is not froze. If so, you will need to thaw it and replace the water valve W10408179. If it is clear, you will need to cycle the icemaker and see if there is voltage coming to the water valve. If so, you will need to replace the water valve. If no voltage is present, you will need to replace the icemaker. You can test this with a multi-meter TJMA-DM1. Here is a link on how to use a multi-meter. Hope this helps. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html