I am getting a code F5E3 code on clock but control is blank and the touch pad don't work at all. when i unplug it and wait 5 min. then plug it in it comes on then go out and then pf pops up on the control side the the clock side says code F5E3 but the touch wont work at all.
Answer Jimmy, The F5 E3 error indicates a loos or ground or L1 (120 vac) to the range " Loss of 120 VAC across L1 to ground or Q19 circuit error. Check ground continuity on all ground harnesses. Replace control". Your first check should be at the power supply to the range, make sure you have 220 VAC across the L1 and L2 terminals, 120 vac from L1 to N and L2 to N, and a good, solid ground circuit to the chassis. Then consider the control .
I have no oven control lights or control temps ect. Also no power to oven elament. Do I need a new oven control? This is for a model kesc307hbto Thank you carle
Answer Hello Carle. Yes, if there is power coming to the clock assembly, but nothing working, you will need to replace the control 3191106. Make sure there is 240 volts coming to the range. If not, it may prevent the power from coming to the control on the unit.