The small element of the triple burner is not working. Would this be the switch? The double and triple work. Do I need to replace complete unit
Answer Hello Gary. You can remove the element and test the ribbon in the element. It should read closed for continuity. If it is open, you need to order and replace the element in the unit.
small burner on triple bruner dose not work by it self
Answer Edward, You will need to check the circuitry of the burner selector switch 7403P255-60 Heres how to test it "Remove and label wiring from 1, 3, 5, 7. Connect volt/ohms meter to 1 and 3, move selector switch to Triple ... should have continuity (closed circuit) Connect volt/ohms meter to 5 and 7 and move selector switch to Dual .... should have continuity(closed circuit)." and heres some meter usage information, should you need it. [http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html] if the switch checks proper, look for a damaged orange wire or you'll need a new triple element 74011093, but thats not likely at this point. Good Luck and Thanks