Evaporator Fan Motor Kit

Don for Model Number ehd191vknro

Answer Hello Don. You will need to remove the back wall of the freezer to access the fan motor. Once removed, remove the screws holding the old one in place and reinstall the new motor. Hope this helps. 

1 person found this answer helpful.

Guest

Answer We will need your model number to answer this for you. 

1 person found this answer helpful.

Tom for Model Number EHD191MKNRO

Answer Hello Tom. Sorry, the model number you provided is not working. We will need your model number to help you with this. Please post your model number with a new question on the parts page. http://www.appliancepartspros.com/modelnumber_locator.aspx 

Nelson M. for Model Number ET18JKXRNLI

Answer Hello Nelson. You can use motor part number 482731 to replace the old evaporator motor. Thanks! 

Michael for Model Number ED19HKXRNR5

Answer Hello Michael. Yes, based on the model number provided, 482469 is the correct fan motor. 

Nicky

Answer Hello Nicky. Hook the green wire to ground and the small ground spade on the fan motor 482469. Then install the red wire and the white wire onto the fan motor spades. You will need to splice them into the wires in the freezer for the old motor. These do not have to be hooked up a certain way.