Is it possible to just get the washer for inside the fill and drain hose connector?
Answer Lisa, if its the washer that is between the end of the inlet hose connection and the hose housing you'll use washer part number 6-013783. However, if it is a washer inside the coupler you'll have to replace the assembly part number W10354998. Thanks.
How easy is it to change out the fill and drain hose? Mine wont stay connected to the faucet anymore keeps popping off and I dont have money for a repair bill so wondering if its possible to do it myself. What screws need to be taken off to get the cabnet off to reach the hose connections?
Answer Hello Brenda. Removal
The faucet coupler provides a means for filling and
draining the portable dishwasher. It connects to a special
adapter which in turn is connected to a faucet at a sink.
When the dishwasher is not in use, the faucet coupler is
stored in a retainer on the rear of the dishwasher cabinet.
1. Disconnect power to the machine.
2. Remove Wood Top.
3. Remove Foil Bottom.
4. Disconnect power cord from the terminal box.
Disconnect the fill hose from the water valve and the
drain hose from the drain pump.
5. Remove the wire tie securing the drain and fill hoses
to a rib on the tub.
6. Install new hose assembly.
You will need to look for the screws securing the parts to the unit.
How long is this fill and drain hose? Is it the same length as the one that originally came with the dishwasher?
Answer Hello Michael. Yes, the hoses W10354998 are the same size as the original ones. This is the only hose set the manufacture offers for this model number. There is a longer drain hose 3385556. Hope this helps.