What does the flume assemble clips attach to on the washer?
Answer Barbara, The water flume assembly 21001760 is located on the rear underside of the washer top assembly.( you will need to raise the washer top panel, using a flat blade tool or putty knife, to release the top hold down clips in the seam, between the front panel and washer top panel, after you remove power to the washer.) The flume fits flush with the top opening and is secured to the top by two(2) mounting screws. An inlet hose from the water mixing valve connects to the flume nozzle.
The water pressure while filling up is low. I have cahnaged the mixing valve but did not fix problem.
Answer Hello Jeff,
You may want to check to see if there are screens on your hoses that may be clogged. If you changed the water valve and still getting slow flow then you should also check your home water pressure.