Ice maker crushed ice button works and cube ice doesn't. Controller or motor?
Answer Hello Tim. You will need to test and see if there is power coming to the dispenser motor 2252130 in the cubed selection. If so, and the motor deos not work, you will need to replace the motor. You will need to tape the door switch closed and press the paddle to test this. If there is no power to the motor, you will need to replace the front cover 2224064B. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. Hope this helps.http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html
Where can I find instructions for removing the Front Cover Assembly that is currently on my refrigerator?
I don't want to break it, and I need to get to the insides because my ice delivery door is not closing shut. Warm air gets up into the storage bin and melts the ice!
Answer Hello EZOO. Here are the instructions from the manufacture. Hope this helps.
NOTE: Sharp edges may be present.
1. Unplug the refrigerator or disconnect the
2. Pull out the ice & water dispenser drip tray.
3. Position the drip tray upside down under
the ice & water dispenser control panel,
and pry the bottom edge of the panel out
at the two small slots with a large-bladed
4. Disconnect the control panel switch connector
from the wiring harness and remove