How do I replace outer door glass?
Answer Hello Carla! To change the glass in an oven door, you will need to determine how to remove the door on the model number you are working on. If you open the door to the first stopping point, some oven doors will lift off the unit in this position. On other models, you will see clips on the back of the hinge toward the opening where the hinge enters the range. If yours is like this, you will open the door all the way open, then pull the clips down until they stop and lock in place. Then close the door to the stopping point and lift the door off the range. If your door does not lift off, and it does not have the clips, then you will open the door all the way open. You will see a hole in the hinge at the bottom of the door. You will insert a pin or nail into that hole and close the door to the stopping point. Then you can lift the door off the unit. Once the door is removed, you will lay it on a soft surface and disassemble the door. Pay attention and make notes if needed for reassembly of the oven door. Once you have replaced the door glass, you will reinstall the oven door back onto the range in reverse order of the way you removed it. Thanks!
I am trying to replace the outer glass door, but it won't slide into place thru the brackets. Do I have to disassemble the door? How does this glass get installed properly. I purchased it from AppliancePartsPros.
Answer Hello Phil. 1. Open oven door and place door hinge locking device
into lock postion.
2. Place oven door in first stop position, then grasp both
sides and lift up off the hinge receivers. 3. Dis-assemble the oven door to replace the door glass 74008682 in the door assembly. 4. Re-install the oven door on the unit.