Proper way too install outside glass& door to oven door?
Answer Eric, Here's some basic information ; "REMOVING THE OUTER DOOR GLASS 1. Turn off the electrical supply to the range. 2. Remove the oven door , and position it on a protected floor with the handle and outer door glass facing up. 3. Raise the top of the door and remove the two screws that secure the top of the door trim and the handle to the door liner, then remove the handle and top trim. 4. Slide the outer door glass out of the bottom trim channel and install the new glass in its place. 5. Install the top trim and handle on the oven
door and secure them in place with their two mounting screws. REASSEMBLY NOTE: The side trim on Whirlpool oven doors fits under
the top edge of the outer door glass, and the side trim on Roper models fits over the top edge of the glass. Make sure that the trim is
seated properly when you tighten the screws. 6. Reinstall the oven door on the range." Have a vaccuum cleaner near by to remove any glass shards from inside the door and the trim strips for the glass. Thanks and Good Luck