This model's gasket is on the door, not the cabinet as in your video, and seems to be connected all along it's length, rather than with pins. How do I replace this gasket? thanks in advance!
You will need to remove the door and disassemble the door. To do this you will open the door to the first stopping point. Once you do you will lift the door straight out. Once you do this you will lay the door with the front up. Remove the screws holding the lower trim and door handle in place. Once you do this you will have access to the inside of the door. Loosen the screws holding inner door panel in place where the gasket is and remove the old gasket and install the new one.
How to install oven door gasket?
To replace the door gasket, you will need to disassemble the door. You will need to open the door to first stopping point and lift the door off. Once door is off then you will need to take the lower trim off and remove the door glass and the handle. You will then loosen the pad which is the panel on the inner door that holds the gasket in place and then remove the old gasket and install the new gasket.
HOW DO YOU REPLACE OVEN DOOR GASKET ON THIS MODEL RANGE?
Answer Hello Ray,
The door gasket has clips that hold it in place that are attached to the gasket. YOu woul simply pull the old gasket out, may need to use needle nose pliers to release clips. Then push in new gasket.