What is the install procedure for part number 12920710?
Answer Hello Bill. Disconnect the power and pull out the unit. Access the cover on the back of the unit and remove it. Once removed, you can remove the old board and install new board. Then replace the cover and plug the unit back in. Go the front dispenser and follow instructions sent with the board and reprogram the new board.
I replaced the Hv board and it won't accept the program code 1311
Answer Jamie, A couple of things to check. Make sure you verify the correct model number (no numbers after the AEB), and verify you have the correct control board for the model number you have. Verify the correct personality code to to enter, it is printed on the production / serial tag inside the refrigerator, in the lower right hand corner of the tag. Remember your time is limited between button presses, you can't read and press buttons at the same time, it takes too long. You have to do it 1,2,3 (in miliseconds) or the board won't accept the program or code. If necessary, you may have to remove power to the refrigerator in between attempts.