Please advise me of how to install these hinges step by step. Thanks!
Randal H. for Model Number RLN385UW
Answer Hello Randal,
The service manual gives these instructions for the removal of the hinges:
To Remove Cooktop:
Disconnect power to unit. Remove screws securing main top to burner box assembly, located at the front of the range (underneath the door lock lever). Disconnect wiring on models with solid disk elements. On Ceramic Glass top models, the elements are located on the burner box assembly and only the glass assembly will have to be removed. Note: The Ceramic Potted Cooktop "Glass" is not a replaceable part. It is available only as an assembly and not as an individual part for servicing. Raise and pull top away from tabs (if applicable) located on back guard and lay aside on protected surface. Reverse procedure to reinstall.
To Access Oven Door Hinges: 1. Disconnect unit from power source before servicing. 2. Remove main top assembly as described previously and lay aside securely. 3. Remove screws securing side panel at the top and back of frame. 4. Remove 2 screws securing hinge to front frame flange. 5. Complete hinge assembly may be removed from rear. 6. Reverse procedure to reinstall.
Is the spring part of the hinge assembly? Is the hinge the same for right or left side?
Ted for Model Number RLT-370
Answer Hello Ted. Yes, the sping is part of the hinge assembly Y07655200 and you use this on both sides. Hope this helps.