Hinge

Johann for Model Number wgd9600tw2

Answer Johann, Yes, this hinge will work on either side of the door. 

Pam T for Model Number WED9470WW!

Answer Pam, If the hinge on the inside part of the door is what is loose then you will have to disassembly door to tighten. There are no instructions available to do this but the inner door should have screws to allow you to access the interior of door assembly. 

Note: This question is for the older version of this part, but we thought you might still find it helpful

Scott M. for Model Number WGD9550WW1

Answer Hello Scott, Remove the screws that hold the hinge to the washer front. After the screws are all out completely, lift on the door and the door, hinge and all, will come off in your hands. Now lay the door assembly on a towel or somewhere the door and personal property won't get damaged. and remove the screws holding the hinge to the door. Screw the new door hinge to the door and "hook" the assembly to the unit. Once it's held in place by the hooks, insert the screws and your done. 

Note: This question is for the older version of this part, but we thought you might still find it helpful

Dawn S. for Model Number Wed9400sw2

Answer Hi Dawn. You will need to replace the whole hinge assy. part # W10310366. Parts not separate. Thank You. 

Note: This question is for the older version of this part, but we thought you might still find it helpful

Victor for Model Number Kenmore Gas dryer 110.97892601

Answer Hello Victor! Yes, our part number W10310366 is the same as the Sears manufacture part numbers W10139920 (8577250). Thanks! 

Note: This question is for the older version of this part, but we thought you might still find it helpful

Jeffrey for Model Number MEDE500VW1

Answer Hi Jeffery. The only part we can offer is the whole hinge part # is W10310366. Thank you.