I am not getting water so it can freeze and make ice.
Answer Hello Pop. Test for power to the water valve. No, power, replace the board. Power at the valve and no water, replace the valve. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html
How do you control the water flow into the ice machine? The amount of water thats going into the ice cube tray is too much and it's making the ice cubes act like one piece of ice and it jams the ice dispencer
Answer Hello Tom,
There is no calibration short of the fact that the ice maker fills on a timed basis. The water valve is energized for about 7 seconds. This is a predetermined amount of water fill given the volume that can pass through the 1/4 inch water line. If the ice maker is overfilling, you either have all of a sudden had an increase in water pressure, (not very likely although possible), or the water valve WR57X10033 has started failing and is closing too slowly, overfilling the ice mold.