Icemaker, Complete Add on Kit.

Hereld for Model Number 106 9710683

Answer Hello Hereld. The correct replacement icemaker for your Kenmore model 106.9710683 is part number 4317943. Hope this helps. 

1 person found this answer helpful.

Anthonyu for Model Number kTRC22k

Answer Hello Anthonyu. If the icemaker is over filling, you will need to order and replace the water valve on the unit. If the icemker is just leaking and not overfilling, you will need to replace the icemaker. 

Joe for Model Number whirlpool model et18zkxdn01-type 18tfa95

Answer Hello Joe, Ice maker kit 4396418 will work for this model. It includes the ice maker, water valve, water lines, fill tubes, and attaching hardware needed to install an ice maker in an ice maker ready unit that has never had an ice maker installed. 

Bob

Answer Hello Bob! The replacement icemaker is part number 4317943. This is the icemaker only it does not include the bail arm, part number 627792. This icemaker comes with installation instructions. Thanks! 

Ronjohn for Model Number KitchenAid, KTRI18K

Answer Hello Ronjohn, Based on information provided it appears that the fill tube freezing would be cause of icemaker not working. This is caused by a seeping water valve and you would want to replace valve. 

Meredith J for Model Number Whirlpool side by side Model No. GD5SHAXLQ02

Answer Meredith, There is no "internal" tubing to the ice maker, all the tubing is mounted on the back wall and inside the compressor compartment. You also have a filter housing and filter, located behind the kickplate vent grill, you'll want to remove the grill and check for a possible leak from the tubes on the filter housing, and move the refrigerator away from the wall and check the tubing and connectors for cracks and leaks, including at the water inlet fill valve.