Washer fills but spray arms don't turn. It does drain though. Thanks
Answer Dave, you're pretty much on target, you most likely have a damaged wash impeller, that cannot produce the pressure to properly drive the water through the system and the spray arms. Your first check should be to check the water level in the bottom of the tub. Start the dishwasher and let it run a few minutes(3-5) open the door and remove the lower rack. The water level should be touching or partially covering the bottom of the heater element. If not, there's not enough water in the system to produce the pressure to drive the arms. If the fill level is in range, then replace the impeller, we would recommend you use 6-915435.