My dryer gets too hot on all cycles. What part do I need?
Answer Hello Sally. You need to check the venting and see if it is kinked or clogged on the unit. Also, look for a grounded out heater or bad cycling thermostat.
The electric power on the wall and the conections are ok,but the dryer dont start.
Answer Hello Victor. You need to check and make sure the thermal fuse 3392519 and the door switch 3406107 is good on the unit. If one is open, it will prevent the unit from running. They need to read closed for continuity. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html