How do I install latch part # AP3179951? Thanks.
Answer Hello Bob. You will need to disconnect the power to the unit. Then remove the screws securing the inner door panel. Remove the inner door panel and remove the cover off the control board. Now you can access the door latch assembly 8193830. Remove the switches and reinstall on the new latch. Reinstall with the new latch in reverse order. Hope this helps.
Replaced the two counter balanced ropes and the door will not "catch". I have tried adjusting the strike plate and still it pops open. Help!
Answer Hello Dave. Check and make sure the dishwasher is level after replacing the door spring ropes. If not, it can cause the door to pop open, and release from the latch 8193830. Also make sure there is not to much tension on the springs for the door. Hope this helps.