My water dispenser is not giving any water at all... when we push the lever in, it seems loose.. Then the ice dispenser isn't working either no Ice at all,,, But it is making ice....Help Please
Kathy for Model Number ed5hhgxtooo
Answer Kathy, based on your information, you may want to start by dismantling the dispenser facade, and checking the paddle pivots and actuator switches. Remove power to the refrigerator, You'll need a flat blade screw driver,use the dispenser grille as a pivot against the door panel, find the two slots molded into the bottom edge of the facade, use the screw driver to pry out on the bottom edge of the facade until it releases from the dispenser housing. label and disconnect the wires from the selector switch and set the facade aside. remove the switch bracket assembly(2 phillips head screws) and then check for brokrn or damaged paddles and actuator switches.
Water won't dispense. Ice dispenses fine. What could be wrong? Water dispensed this morning and now does not.
Eric R. for Model Number ed5rhqxmq00
Answer Hello Eric. Test for power to the water valve when the dispenser is pressed. If there is power there, unhook the water line for the dispenser from the valve and see if water comes out there. If not, replace the water valve W10408179. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. Hope this helps. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html