On the hot/cold water solenoid, the cold water will not shut all the way off,I thought if I cleaned it,it might be ok..
Answer Hello Dean. Based on the information you provided, it sounds like the water valve 285805 is bad and will need to be replaced.
Washer fills and does nothing afterwards. I am trying to determine if it is the Lid Switch or Water Level Switch?
Answer Hello Lisa,
You can test this from the pressure switch W10337780. With a test meter and using ground as a reference, test for 120Vac. If you have it on two terminals, it's passing the voltage. You can test the lid switch 8318084 from the main top where the three wire connector plugs in. If you unplug the unit, you can test for continuity when the lid is closed and when you find it, open the lid and make sure the circuit opens. I would first suspect the lid switch since this is the configuration that is so delicate if the lid is dropped.