Lid Switch Assembly

Guest

Answer Hello. If the lid switch is broke, then the machine will not spin the water out. Hope this helps. 

3 people found this answer helpful.

Guest

Answer Hello! Lid switch assembly 3949238 will fit on your Kenmore/Whirlpool model 110.25842400. Thanks! 

2 people found this answer helpful.

J.s. for Model Number 22422100 kenmore washer made by whirlpool

Answer Hello! This answer was located on our Repair Forum, this is a free service in which technicians will assist with answering repair questions for our customers. Please use this link to assist in your repair: http://forum.appliancepartspros.com/washer-repair/122464-washing-machine-wont-drain-spin-water-out.html. Hope this helps! 

1 person found this answer helpful.

Julio

Answer Julio, The screw is 1 1/8" long and is phillips head but we do not have the screw size. 

Julie for Model Number 11082172820

Answer Julie, You would want to test the lid switch 279347 to make sure that it has continuity when closed. If not then you would want to replace the switch. 

Greg for Model Number Kenmore 80 Series Washer

Answer Hello Greg, Set the test meter to the resistance setting RX1. Touch the leads together to make sure the meter reads Zero. Zero is another term for "continuity". When you are not touching the leads together it will read OL, (this means overload. In other words, too much resistance to give a reading [no continuity]). Now you are testing from black wire to black wire. It should read open until the switch is activated. When it is activated, it should read Zero again, (or the resistance of the meter leads. This will sometimes be .02, .03, etc...).