Light Bulb

Scott S for Model Number GMC305PD

Answer Scott, To replace the lower lights on the microwave, there is a cover over the light that is held in by a screw. Remove the screw and lower the cover, unscrew or pull out the light bulb. reinstall. 

Gabe for Model Number GMC305PD008

Answer Hello Gabe, the microwave bulb W10440740 just plugs straight in. You should be able to remove the lens 4375318 and pull the bulb straight out. If the lens won't come out, you will have to get into the top of the microwave from the outside. Hope this helps! 

Lenny for Model Number Gmc305prq01

Answer Hi. Remove the microwave. Remove the cabinet cover back screws and you will need a T-20 security type screwdriver tip on one back screw to get the rest off (use the same tool for the rest). Pick one up @ the local hardware store. Then the bulb part # 4173175 is accessed from the top inside the cabinet. Thank You. 

Tex for Model Number GSC308PJS05

Answer Hello Tex. If the cover turns both ways, you will need someone to hold the socket on one side and you will unscrew the cover on the other side. Once removed, you can access and replace the light bulb 4173175. Thank you. 

Joan for Model Number RMC305PVSOO

Answer Hi Joan. The surrounding trim needs to be removed. Look at the bottom below the door and remove this cross piece trim first. Open the door and remove. Remove power. Remove the door. This will give better access to the bottom trim screws. This removed will give access to the side trim screws. Side screws removed will give access to sliding the entire microwave out and then the microwave top cover. The lamp base socket is in the top. You will twist and lift the socket to access the lamp. Do not use your fingers on the new bulb because of the residue of your finger tips will react with the Quartz type bulb and once lite, it will react and negatively affect the life span of the bulb. Bulb part # W10440740.Thank You. 

Bill for Model Number GSC308PJS05

Answer Hello Bill. You need to remove the outer cover of the microwave to access and replace the bulb you are referring to. Hope this helps.