Lint Filter

Michael for Model Number RAB3132DW0

Answer Michael, When you take off the cap on the agitator there is a bolt that holds the agitator in place. You will want to make sure that this bolt is in place and tightened down. The little pieces of plastic that are broken could be the cause but the bolt is the most common. 

Ruby P. for Model Number LSR8233JQO

Answer Hello Ruby! At one time there was a filter plate under the tub however, it is no longer required by the manufacturer. They now offer a filter plug kit, part number 285868 to replace the discontinued filter. Thanks. 

Maggie B. for Model Number wfw9700va0l

Answer Hello Maggie. Yes if you remove the toe panel, there is a filter located inside the pump assembly W10130913. 

Joe for Model Number La6300xtwo

Answer Joe, It "snaps" on and off the lower agitator " Manual clean lint filter (model lA6300XT) Clean the filter at the bottom of the agitator after every load for the best filtering results. To clean: 1. Lift off the agitator barrel. 2. Wash or wipe the filter clean in the bottom of the agitator barrel. The filter is not removable. 3. Replace the agitator barrel and snap it into place." Good Luck and Thanks 

A.j. for Model Number la5000xswo

Answer Hello A.J. This model has a bolt that holds the agitator down to the transmission shaft. If the bolt isn't loose, the agitator hole in the agitator itself (being plastic) is probably wallowed out. This would require the replacement of the agitator 387838. I hope this helps and have a great day! 

David C for Model Number lsc8244bq1

Answer David, Review the repair video attached to this part number 285811, It's more informative than I can be, in this limited space. Thanks and Good Luck