Hi, my oven is off approx 30 degrees from what the knob says,is there a temp adjustment on this unit? Or will I need a new thermostat? Also what is the accepted variance in temp +or- what?
Answer Hello Kraig. You can adjust the temperature. Press the bake key and then set it to 550°. Press the bake key again and hold it for 3 seconds. The temp off set is displayed and can be adjusted +-35° by using the uip and down keys. Press any other button to exit the program.
I Have an F1 fault and the door is locked. It occured during Cleaning. How can I determine whether it is the panel or the clock that is the problem. and are these parts available to replace or a substitue
Answer Hello Jerry. You will need to replace the control board and the door lock assembly. You can try replacing just the control board at first, but if the oven does not unlock then, you will need to replace the lock assembly as well on the unit. Also, check the oven sensor on the unit. It should read 1100 ohms at room temperature. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html