I am getting a erro code F2 E0. What I need? and instructions to install myself, I did reset and still didn't work.
Answer Hello Doug,
The F2 E0 Erro code indicates a stuck key or keypad disconnect. What you want to do to check, unplug range and check to make sure that keypad is firmly connected. Plug in range and observe for longer than 1 minute, if error remains, unplug or disconnect power. Replace keypad. Plug in or reconnect power and observe for more than 1 minute. If error remains then replace the display board.
I am getting a erro code F2O
E0. What I need?
Answer Hello Otto. Based on the error code you provided, it sounds like the membrane switch 9756559BL is bad and will need to be replaced. The error code is for a stuck key or button. Hope this helps.
I am getting a code F1E8. Is this what I need?
Answer Hello Tom. Most of the time a F1 code means that the electronic control is bad. Here is a test that you can try to help determine if this is the problem.
1. Disconnect power for at least 30 seconds.
2. Re-apply power and observe for at least one minute.
3. If code re-appears, replace control board (also called ERC or clock).
Here is the electronic control for your model Part Number: 9762810