Getting ready to do some Easter Baking and the F-codes are creating grief! F-3, F-4, F-5. We have experienced F-1 in the past and we have replaced this part multiple times. This is the weak link on this oven, which I really like other then this. Should the test be the same as the F-1 message? Thanks in Advance for your answer.
Kathy for Model Number ARHSC8750
Answer Hi Kathy. I would use a volt/ohm meter part # TJMA-DM1 to assist. you in your diagnosis. The F-1 code is the clock membrane (mylar) shorted issue. Unplug the ribbon cable from the control board. If the code continues, you will need to replace the control board AP4041348. If the code is gone, you will replace the membrane switch 316189B. The F-3 code is a open oven sensor part # Y0314907. The F-4/5 codes are a door lock situation. The door motor is part # Y0315908.The door lock switch is part # 59002155. Is the door unable to open? Is the door fully closing and allowing the door switch to tell the clock it's position ? Switch part # Y0316882. Thank You.
Have a question as to which part to replace. The Timer keeps beeeping on its own. The range shows a service code of F1 pad malfunctioin. Is this caused by bad Membrane switch panel or the main control panel?
Jim for Model Number zrtsc8650e
Answer Hello Jim. Unplug the ribbon cable from the control board. If the code continues, you will need to replace the control board 31949201. If the code is gone, you will replace the membrane switch 316189B. Hope this helps.