I have a side by side refrirator, Kenmore purchased 2003, I just replaced the control board(2252115). After replaced the board, ice dispenser is not function as before I replaced it. The water dispencer is ok, Ice is not building, Ice dispenser motor do not rotate. How do I fix it ? Thank you.
Answer HI. Find the wiring diagram either behind the toe kick grill or in with the fridge controls. Make sure the ribbon cable and all pin connectors are tight and pushed in squarely. Use a pick tool to go inside the pin connector to make the inner female pin tighter when it is pushed in onto the board. Look under the upper door hinge and inspect the wire connection there as well. Make sure these pin connectors are not burned or the pins are not fully inserted and connected. Jumper these connections if they are too burned to repair. Since you stated that it all worked before you replaced the board then concentrate in the fountain control connection. Make sure the keypad controls are mechanically operating well every time. Thank You.