We've obtained a needed replacement PCB and can't quite figure out how to remove the plastic housing on the ceiling of the ref compartment. We don't want to break anything. The cover housing seems to be free on its sides. Thanks.
Answer Robert, To remove the control board housing " PC Control Board (some models) 1. Remove light shield by sliding shield to rear to release
cover. 2. Depress with a screw driver through two slots in the front of the light housing release tabs to release Control Board housing.
3. Control Board housing will drop down exposing Control Board. 4. Unplug two wire harnesses plugged into the Control Board. 5. Release tabs holding Control Board to housing." Once you remove power to the refrigerator, open the refrigerator door(s) and remove the top shelf. If you look up along the backside of the control box assembly, you'll see two(2) slots along the ceiling, using a flat blade scredriver, insert the end into the slot and "feel" for the retainer tabs. Press in on the tabs and pull down on the bottom rear corner of the box. Follow the remainder of the instructions and you'll do fine. Thanks