My Maytag gas range madel number mgc7430ws , I need to replace the gas ignitor, part number w10110488, it should have 6 plugs on the top(2 on the right and 4 on the left), your online picture has total of 7 plugs(3 on the left and 4 on the right), is this a new manufacture part ? How can I deal with the additional plug on the right side, do you have any specific installation instruction on it? Please advise.
Answer Dave, Yes this part is a "new manufactured part" The manufacturer has "substituted the original spark module with this component. All parts purchased from AppliancePartsPros.com are "new" and ordered and supplied by the manufacturers of the product. Wiring the new part is a simple process. The four(4) smaller 1/8 in. terminals are for the burner igniter wires to attach to, wire position isn't critical on this type spark module. The three wires on the left are more critical, if you look at the area you should see words or emblems, stamped in the body of the part, "L" is line voltage into the spark module and have a Black wire attached to it, "N" is the neutral leg of the power supply and should have a White wire attached to it. The third terminal will have an "arrow" or "grnd" stamped on it and a Green ground wire attached to it. If there is no green wire, then the spark module will ground itself to the chassis when the module is attached to the burner box.