I replaced the motor drum and now the belt keeps slipping off what is the problem?
Answer Hello Antoinette. Make sure the motor is installed properly. If so, you may have bad bearing and need to replace the outer tub assembly 34001458.
My washer does not spin, what do I need to do to check the problem?
Answer Hello Bree. Check and make sure the drain pump is good and is working on the unit. If not, it will prevent it from spinning. If it is good, you will need to check the motor. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html