Orifice, Burner (type 1)

Ron P. for Model Number WGD9550WW2

Answer Ron, the LP conversion kit is part number W10317689. Thanks! 

Kevin for Model Number Whirlpool GGW9250PW3

Answer Hello Kevin, To convert your dryer from propane to natural gas, part numbers 15418 - natural gas orifice, 694424 - nat. leak limiter, 694423 - regulator adjusting screw and 694422 Spring, Nat.gas are needed. It is recommended that a qualified installer perform the conversion. 

Bob for Model Number Maytag Model MGDB850YW1 2012 Bravo Gas Dryer

Answer Bob, the LP conversion kit is part number W10317689. Thanks! 

Daniel for Model Number GGW9250PW1

Answer Daniel, No, there are other needed parts. You didn't mention which conversion you're doing, back to NAT gas or to LP gas. But you will need the LP conversion kit W10317689 if you're going to convert to LP. or 694424 limiter, 694423 regulator, 694422 regulator spring, 15418 burner orifice, if you're returning back to Nat Gas. Be carefull, and don't overtighten the fittings, and check for gas leaks with a bubble solution. Thanks and Good Luck 

Len for Model Number WGD9600TW1, 2008

Answer Hello Len. You will need to test the thermistor 8577274 and the flame sensor 338906 and make sure they are good. The flame sensor should read closed for continuity. Also, check the igniter 279311 and make sure it is getting hot enough to light the gas. Here is a link on how to use a multi-meter for the testing procedures. Hope this helps. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html 

Len for Model Number WGD9600TW1

Answer Hello Len. You will need the natural gas regulator 694423, and the limiter 694424. These install intot he regulator on the unit. Also, you will replace the orifice 15418. Hope this helps.