Is there some place that I can get instructions for replacing the front glass on this oven door?
Answer Hello Nicki. To change the glass in an oven door, you will need to determine how to remove the door on the model number you are working on. If you open the door to the first stopping point, some oven doors will lift off the unit in this position. On other models, you will see clips on the back of the hinge toward the opening where the hinge enters the range. If yours is like this, you will open the door all the way open, then pull the clips down until they stop and lock in place. Then close the door to the stopping point and lift the door off the range. If you door does not lift off, and it does not have the clips, then you will open the door all the way open. You will see a hole in the hinge at the bottom of the door. You will insert a pin or nail into that hole and close the door to the stopping point. Then you can lift the door off the unit. Once the door is removed, you will lay it on a soft surface and disassemble the door. Pay attention and make notes if needed for reassembly of the oven door. Once you have replaced the door glass, you will reinstall the oven door back onto the range in reverse order of the way you removed it.
I would like to change the color of my wall oven. Whirlpool gbs277pds6. Is it possible to change from stainless steel to black?
Answer Nicki, the outer door glass in black is part number 8300912 and the control panel assembly in black is part number 8300452. Unfortunately, the handle in black (part number 4448405) has been discontinued and is no longer available. Thank you for your inquiry.
On Part 3136087, the glass shattered and it is hard getting the excess glass off of the existing door. Any recommendations on how to get this glass off without hurting the door and cutting yourself up? Also I want to make sure I get the right part..how is this glass different from part PS374298?
Answer Bob, The ps374298 4450379 is the microwave outer door glass and the 8300912 8300912 is the oven door glass assembly for a black colored unit. The major difference in the parts is going to be the size of the glass, and the mounting procedure based on which door glass you need. Which door glass are you replacing ? Thanks