Oven Door Handle

Chance for Model Number mer5775qan

Answer Hello Chance, To change the handle in an oven door, you will need to determine how to remove the door on the model number you are working on. If you open the door to the first stopping point, some oven doors will lift off the unit in this position. On other models, you will see clips on the back of the hinge toward the opening where the hinge enters the range. If yours is like this, you will open the door all the way open, then pull the clips down until they stop and lock in place. Then close the door to the stopping point and lift the door off the range. If you door does not lift off, and it does not have the clips, then you will open the door all the way open. You will see a hole in the hinge at the bottom of the door. You will insert a pin or nail into that hole and close the door to the stopping point. Then you can lift the door off the unit. Once the door is removed, you will lay it on a soft surface and disassemble the door. Pay attention and make notes if needed for reassembly of the oven door. Once you have replaced the door handle 74011778, you will reinstall the oven door back onto the range in reverse order of the way you removed it. 

Judy for Model Number Stove door handle AP4100365

Answer Judy, Yes, the screws are available seprately 74011674, You didn't supply a model number but here are the basic instructions for dismantling the door. " 1. Remove oven door, see "Oven Door(s)-Door Removal" procedure. 2. Remove screws securing doorframe to liner located at the bottom. 3. Remove side screws securing doorframe to door liner. 4. Remove screws securing door trim at the top. 5. Slide doorframe and glass off liner from the bottom. 6. Remove screws securing door handle to door trim / liner." Thanks 

David for Model Number mgr5775qdw

Answer Hello David. 1. Open oven door and place door hinge locking device into lock position. 2. Place oven door in first stop position, then grasp both sides and lift up off the hinges. 3. Reverse procedure to reinstall oven door. Hope this helps. 

Robert C. for Model Number MER5755QAQ

Answer Hello Robert! You will need to remove the door from the oven. Disassemble the door to access the screws for the door handle. Reinstall in the reverse order. Hope this helps! Thanks!