lower bake element was not working so i replaced it and still not working what next too replace.
Answer Michael, Does the broil element in the same oven work ? You'll need to turn power off to the range, remove the rear panel, and check the wiring to the element(s) for damage and loose connections. From there you'll need to trace the wire(s) back to the remote "DLB" relay and check the wires and relays there, and back up to the main control panel/control. It is not uncommon for a relay to short out and malfunction, when a loose or broken wire shorts out to chassis ground. If all checks are OK, then replace the control. The oven temp. sensor is the least likely issue at this point. Good Luck and Thanks